Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: Sequoia Doc ID: RM000003GQS000X
Title: LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE SPIRAL CABLE SUB-ASSEMBLY

(a) Remove the spiral cable sub-assembly SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL (2008 Sequoia)+ .

2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Disconnect the 2 connectors.

(b) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the wiper switch.

NOTICE:

Do not press the claw too hard, as it may be damaged.

3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

(a) Disconnect the connector.

(b) Remove the headlight dimmer switch, as shown in the illustration.

(c) Disengage the 2 claws and remove the headlight dimmer switch.